Table Saw Stock Guide Part
Description
This is a part for the jig shown in the following video https://youtu.be/wbxqx7n-qy4 It allows to add two springs at the top (two round holes) for better adjustability to uneven surfaces. The hardware used is as follows: * 4x die-springs 6x12x20mm https://www.aliexpress.com/item/32999527920.html?spm=a2g0s.9042311.0.0.51d64c4dbrlLfn * 4x white bolts M6x40mm https://www.aliexpress.com/item/33012250869.html?spm=a2g0s.9042311.0.0.27424c4dDHzJtw * 4x white M6 locknuts https://www.aliexpress.com/item/4000957589431.html?spm=a2g0s.9042311.0.0.27424c4djrRhwF * 2x black bolts M8x50mm https://www.aliexpress.com/item/4000896301219.html?spm=a2g0s.9042311.0.0.27424c4djrRhwF * 2x black M8 locknuts https://es.aliexpress.com/item/4000957589431.html?spm=a2g0s.9042311.0.0.274263c0GYPWuJ * 2x wheels https://www.amazon.es/gp/product/B0792S2JG3/ref=ppx_yo_dt_b_asin_image_o01_s00?ie=UTF8&psc=1 * 4x 8x22x9mm one-way bearings https://www.aliexpress.com/item/33040222926.html?spm=a2g0s.9042311.0.0.27424c4dObnXdx * 2x 15mm railblock rod clamps https://www.aliexpress.com/item/32841314089.html?spm=a2g0s.12269583.0.0.5ee2196aLpcKOn&spm=a2g0o.store_home.hotSpots_12874274.5&spm=a2g0o.store_home.hotSpots_12874274.5 * 2x 15mm aluminium rods https://www.aliexpress.com/item/32740488050.html?spm=2114.12010615.8148356.1.61f6f12fWxnnRj * 2x 15mm single rod clamps https://www.aliexpress.com/item/32736357035.html?spm=2114.12010615.8148356.31.732c188ayW2nw6 * 4x 12x6x20mm compression die-springs https://www.aliexpress.com/item/32996720132.html?spm=a2g0s.9042311.0.0.27424c4dW0CX3i I useed Carbon Fiber PETG at 240ºC (nozzle) and 80ºC (bed). No need for supports.
Statistics
Likes
0
Downloads
0