
Longer LK4 / Diggro 3 Direct Drive Remix
Description
This is a remix of a direct drive mount from Slum Tek. I wanted something a bit stronger than the original design. I "beefed up" some of the mount points, added mount slots in the front and corrected some minor dimensional in inaccuracies. This design works for me on my Diggro Alpha 3 which should also fit the Longer LK4 and possibly the Alphawise 20/30. Keeping with the idea of a mount that does not require any disassembly, for this mod you only need to loosing the 2 roller wheel bolts and slip the assembly down onto the plate and bolts and then tighten it all back up. You may need to re-adjust the wheel tensions. For the filament sensor I just jumpered the connections and taped it off to the side as it is not important to me to have functional. You would need to extend the cables most likely if you want to use it. This was my first 3D project so I am sure there are some flaws but it works for me, hope others find it useful as well. Thanks to Slum Tek for the original design.
Statistics
Likes
17
Downloads
0