Sidewinder X1 Mirror Corner Piece
Description
My local Home Depot sells Glacier 12 x 12 mirrors (6 pack) for about $11. The mirrors fit on the stock bed almost perfect but won't sit without applying some form of tape or adhesive. I personally don't want to do that so I made these corner pieces that slide in with no issues. You may need to minimize the print by a percent or two so print one up first and test. No supports needed, however you may need to drop the Z by 2mm if it's not sitting flush on the bed. You only need to use three (3) of the corner pieces as well since the nozzle will hit the bottom corner (0,0). Link for mirror from Home Depot: https://www.homedepot.com/p/Glacier-Bay-12-in-x-12-in-Plain-Edge-Bath-Mirrors-6-Pack-81175/205513215
Statistics
Likes
5
Downloads
0