SKR V1.3 Case for MPCNC
Description
** Added Bottom that will hold a 15mm thick fan. ** Added lid with V1 Engineering logo I increased the size of the hole for the wire entry and shrunk all bolt holes to 2.75mm for direct fit of 3mm hardware. Also created a basic flat top without the TFT mount. I used a separate case to remotely mount the TFT screen for freedom of movement around the machine. This can be found below: https://www.thingiverse.com/thing:4439160 Here's a link to my Marlin v2.0.5.3 branch for the BTT SKR 1.3 w/TMC2208 stepper drivers running the MPCNC with Dual Endstops. This is ready to build in PlatformIO. https://github.com/cmenard/Marlin/tree/MPCNC_SKR1.3_v2.0.5.3
Statistics
Likes
1
Downloads
0