FFCP Shock Absorber Feet
Description
These are a <a href="https://www.thingiverse.com/thing:4117549">REMIX of Shock Absorbers</a> for the 2016+ Flashforge Creator Pro. What makes my version different is that it is designed to REPLACE the OEM cushion feet AND use the installed screw. The Sorbothane Rubber bumpers cost $21 for a four-pack at the time of this article. You need to purchase those to work. These feet are designed to be offset a bit. One end has the hole to put the screw in.. The other end is (mostly) rested on the metal frame of the FFCP (see photos). I have TWO VERSIONS of the .stl files: (a) FFCPFootPad_Tight.stl - Will require some post-processing to make the holes the correct size to fit the screws (I wanted it to fit-like-a-glove). So you will need to drill or sand or file these holes a little larger for the screws. (b) FFCPFootPad_Loose.stl - Are larger holes so the screws should be able to fit immediately. (Probably the best choice for someone who is lazier and doesn't care about a tight fit.) Here is where I got my bumpers from: <a href="https://www.isolateit.com/hemispheres/sorbothane-hemispheres-bumpers/sorbothane-1-hemisphere-0510131-0510130-bump-on.html?fbclid=IwAR2Uu11Qyv2NcXH6L7HMD5eE89e2m8jOOxgvexc5OqLU4oJLiYHJdnBsnO0">Sorbothane Bumper</a>
Statistics
Likes
3
Downloads
0