Gauge 1 S6-S12 Percy Prop Replica
Description
It should be noted that the entire model is not contained within the thing files, the valve gear is intended to be a mix of custom built brass parts as well as some Märklin parts from a BR 80, the wheels included in the thing files are also stand-ins for the intended Märkin parts. The brass parts used are as follows -Brass rod - 2mm diameter -Brass tube - 3mm diameter, (check to see it slides nicely around the 2mm rod) -Brass sheet - 0.64mm thickness (really anything above 0.5mm thickness will work) And should all fit into the holes provided in the cylinders. Speaking of cylinders, the cylinders on my model are held in by a regular old 1.5mm diameter bamboo skewer, but feel free to use a brass rod instead! Percy is not, at least in these files, fitted with a means of powering him incorporated, unfortunately that's something you will have to work out yourself. Happy building, and if you do decide to make this model, please put it under makes so I can see your beautiful work! Cheers, Jamostrainoes
Statistics
Likes
22
Downloads
0