Redesigned stock probe mount and M18 proximity sensor mount for Anycubic Chiron Titan Volcano by MaaD777

Description

Thanks for MaaD777 for the excellent carriage , i have been using it for a while now and i think its the best i ever had on my Chiron, only thing is i had to keep the stock end stop flags because the 3d printed ones from the model were too high, redesigned a shorter lower profile stock probe mount also because the one included needs too much Z offset from the probe, also it is more sturdy and wont flex when probing resulting better ABL accuracy, and thought i may start using the M18 capacitive fixed probe because it gave me good results on glass bed and no need to install it and remove it when probing and printing so i designed a mount for it that will take the space of the right fan because i thought one fan is enough. Kindly use the following offsets if using the redesigned stock mount : define X_PROBE_OFFSET_FROM_EXTRUDER -1 // X offset: -left +right [of the nozzle] define Y_PROBE_OFFSET_FROM_EXTRUDER -5 // Y offset: -front +behind [the nozzle] define Z_PROBE_OFFSET_FROM_EXTRUDER -19.55 // Z offset: -below +above [the nozzle] and the below offsets of using the M18 Capacitive fixed probe: define X_PROBE_OFFSET_FROM_EXTRUDER 49 // X offset: -left +right [of the nozzle] define Y_PROBE_OFFSET_FROM_EXTRUDER 7 // Y offset: -front +behind [the nozzle] define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]

Statistics

Category

Tags