Traffic Light with leds (28cm height)
Description
Hardware ======== - 12xM3 8mm screws - 3xLEDS (WS2811/WS2812) - ESP8266 - 18650 battery + holder Print ===== ### Mandatory parts: - Cover.stl - Post.stl - Head.stl - Head_cover.stl - Lights_mask.stl ### For the bottom box you can choose between: - Bottom.slt (plain box) - Bottom_with_button.stl (with an hole for 12mm button) ### For the lights cover you can choose between - Lights_cover.stl (rounded but less light) - Lights_cover_flat.stl (flat so more light) Build ===== - Screw the post on the cover - Screw the cover on the bottom - Fix the head to the post, you can use PVC glue or just melt the top of the post with the tip of a soldering iron - Insert the lights mask inside the head - Screw the lights cover and head cover on the head Lights ===== If you use a led strip, you have to cut the 3 leds and add wire to space leds. The distance between each led is 45mm . They must be installed behing the light mask. Follow the schema to wire everything
Statistics
Likes
19
Downloads
0