Monoprice select Mini SKR 1.4 (turbo) upgrade
Description
This is a mount to fit the SKR 1.4 (turbo) board in the original MPSM case. You will need 4xM3 nuts to fix the SKR board to the mount and then screw the mount with 2 of the 4 original screws. Since this is a real "low profile" mount you will not able to use all the 4 screws. By adding the other two screws I would have raise the board to leave room for the screw heads and this will lead in driver heatsink touch the Y motor. IF needed you can use some hot glue on the other two screw seats. In another design I've also created a mount for the TFT24 that I used in this mod
Statistics
Likes
6
Downloads
0