Customizable Pet Food Tray (or bath). Self assembling (print in place)
Description
This tray is very quick to attach to a pet cage using the print-in-place fixings it'll hold well to both horizontal and vertical bars. Align the fixings with the gaps in the cage and simply twist 90 degrees to lock them in place. I use this with my birds but it would equally suit a hamster or other small pet. **Please use a food safe plastic to print with (e.g. PLA) and ensure your pet does not chew and eat it!** This should be used for dry food only. It can be used as a bath but the water should not be allowed to stagnate and it should be cleaned thoroughly and stored when not in use. If used as a bath print with an 8% over extrusion (extrusion multiplier of 1.08) to make it watertight. You'll need to increase the tessellation tolerance value in the customizer to around 0.4 to ensure the parts still move with the slightly enlarged dimensions that occur with over extrusion. You'll need to take a couple of precise measurement from your pet's cage before printing this. I recommend some vernier calipers for good accuracy.
Statistics
Likes
7
Downloads
0