Modular Prototype / Development board V1.0
Description
Hi All, this is my modular Prototype board for all development boards. I was sick of having projects sitting around and messy wires to connect breadboards to Arduino and Raspberry Pi's. and when moving the project on the table everything fell apart. So I designed and 3D printed a series of modular boards all fitting a different component to suit any projects, all you need to do is print what modules you need and connect them together. If in future you your project changes all you need to do is switch out the components that you need. Boards come in the following forms Left / Center / Right / or Plate I have listed the STL Files below both existing and future boards i will create (Let me know and i can add more), I will also be making a version to have a second layer above like a 2x2 in a sense. lets see the interest in V1.0 first. Some of these may be tight on the tolerances, but a quick run over with fine sandpaper will be enough to smooth out and tight spots. plus i used PLA so ABS may give a bit more wiggle room. No supports, No raft, 25% infill Now its up to you to make what ever you want. Here is a link to the Youtube video: https://youtu.be/t11XWUqPqSs If you would like to request additional boards please place a comment on that video Existing STL: Raspberry Pi B Raspberry Pi 2,3,4 Raspberry Pi Zero ESP32 Arduino Uno Arduino Mega Netduino Plus 2 Micro Servo 400 Pin Breadboard (Also designed to run with breadboard power supply module in both Pin 1 only, Pin 2 only, Pin 1 & 5) Screw 1/4-20 UNC, Designed for Webcam/Camera mount Future Boards : Arduino Modules 800 Pin Breadboard ESP8266 ESP32 Micro Xbee latte panda
Statistics
Likes
26
Downloads
0