LCD Screen Display Frame Top Mount & Filament Guide Prusa i3 MK3 MK3s Mk2 MK2s
Description
Compatible with: LED Light Bar Prusa i3 MK2/MK3 by SethBon https://www.thingiverse.com/thing:3284730 Universal Auto-Rewind Spool Holder by VincentGroenhuis https://www.thingiverse.com/thing:3338467 Using the Prusa i3 Mk3 top stands for Universal Auto-Rewind Spool Holder by Racx https://www.thingiverse.com/thing:3342786 It should be compatible with all single support filament mounts. This Thing is a very straight forward print not requiring any supports or brims. It includes the cable clips to keep everything organized. Needed hardware: 4pcs M3 10mm 4pcs M3 25mm 4pcs M3 Square nuts 1 zip-tie It's a tight fit so you may need to pull up slightly on the arm to get it to mount. I've been using them for some time without issue. Know conflicts: If you print something very tall you may run into filament binding at the top of the frame. The mounts fully clear the extruder at its highest setting but the filament has to loop back up to enter the top of the extruder.
Statistics
Likes
0
Downloads
0