Slim Softmount
Description
I was trying to recreate a soft mount created by Nicecrash but with some additional changes, so it can be screwed directly to the frame and with slimmer camera holder profile. This design suits for any frame with hole pattern 25mm x 36.6mm including: XL5 V3 (on the photo), DC10 V2, XL V4, DC5, SL5, XL6 V3, XL7 V3, XL7 Lowrider V3, XL8 V3 and maybe some others. V1 of base can be used with mount from Nicecrash as it has the same size of the tube holders! V2 is slimmer and suits better for my mount. I have used tubes of the same size as in original version, with 7x4 mm profile and about 13-14/18-19 cm length. Mount can be secured using 2.5x20 mm zip ties in two ways: passing it through the tube and locking it at the end (front tube on the photo) or using holes on the back side. The base was designed to print on longer side without supports inside screw holes, see the screenshot for orientation of the part or 3mf file with proposed support structures (only for V1). WIP! The mount design is not final, I still didn't receive nd filters from TBS, as I was originally planning to use them, due to transportation issues. Current version fits cheap plastic nd filters with dimensions of 36x35x1.65 mm.
Statistics
Likes
5
Downloads
0