Smoke Plume and base for Falcon 9
Description
Pictured on the Ender3 print bed. Base was my starting scaling point and i scaled the plume down to fit just inside the edge of the base. I made this set to pair with a separate Falcon 9 rocket elsewhere on the site. 9 plumes for the 9 Merlin engines. Ring is for a 24 NeoPixel ring but it is a touch tight, definitely could use some refinement to let the LED ring drop-in. The base is two unique pieces, 4 total pieces required so print each one twice. The screen shot shows both on the bed but that is just to showcase that you could fit both of them on one print on an Ender3, base part files are uploaded individually. You'll have to notch the base depending on where you want your USB cord to come out of. Here is a detailed write-up of my entire build: https://www.reddit.com/r/3Dprinting/comments/gyji7m/falcon_9_wdragon_capsule_and_custom_smokebase/
Statistics
Likes
8
Downloads
0