BedSide Tray
Description
I initially designed this for my grandma, but I might as well share it here. The purpose of this tray is to be latched to the side of a bed and to hold items. The hook is made for 24mm thick material and it takes DIN912 M3 bolt and DIN934 M3 nuts. - The entire print took me about 9.5 hours and about 300grams of filament. This is printable without support but I did use a brim. - The tray is printed in two parts and glued together with super glue. - There are 2 rods used for alignment of the 2 parts during assembly; 5mm and 3mm. - Dimensions of the parts and bolt locations are given in the drawing so you can replace the hook with your very own part to suit your needs.
Statistics
Likes
7
Downloads
0