1515 aluminium extrusion emergency handsaw jig
Description
__Disclaimer:__ ============= This is NOT the recommended method to cut these profiles but if you have no other choice it's better than nothing. It's very difficult to get straight and accurate cuts. So don't use this if you need accurate dimensions. You will loser about 1mm due to the blade width. **Description:** ------------------- This is a jig to cut 1515 aluminium extrusions (for example openbeam or makerbeam) with a metal hacksaw. It's meant to be used with those handsaws that have a 300mm long, 12mm tall and 0.7-1mm thick exchangable blade.
Statistics
Likes
5
Downloads
0