Intel cooling box remade to fan blower
Description
on the warning I created the opposite spiral .It will still need to be tested .Always the original also works, but a new one could be better ..: P -----------------------I make this blower primary for my silence box ---------------- SILENCE BOX : https://www.thingiverse.com/thing:4097082 New update. Remove one partition where is the air outlet ! ( viz photo) .................................................... new reduction for 14 mm hose V2 (double) .......................................................................... https://www.youtube.com/watch?v=NPVYxOlPnj4 pretty cheap, powerful blower (80mm turbine and 100mm diameter) I think it will be one of the few or not the only full-fledged blower.all you need is an intel box cooler with which no one knows what to do. Pliers, sandpaper.The parts don't even have to stick together. Basically, it should be enough to just fold it and the blower is born. don't forget to see what needs to be removed from the radiator. Blades, plugs and protrusions. Everything must be aligned !!! in an emergency, use sandpaper and splitters. Overall, however, the parts fit together. There was a clearance of 0.30mm between the parts. I also give a reduction to 2x 6 mm hose .Th (look on my silence box 2x 5015) I found that this reduction works as an excellent damper :P .. I will try to do more species https://www.thingiverse.com/thing:4097082 you can print the spiral the other way around, but I printed it with supports and slightly sanded the space with sandpaper.because the blades are very fragile! at worst they can be glued with instant glue https://www.youtube.com/watch?v=NPVYxOlPnj4
Statistics
Likes
27
Downloads
0