All in 1 swappable FPV pod for AKK X2 ultimate
Description
This is a remix of the 'VTX AKK X2 Ultimate Mount' by pierpaolobirdi. i also used a part from Moggiex 'Interchangeable FPV Pan/Tilt Camera Mount for RC Models'. this version allows you to mount the vtx, antenna, fpv cam and even a HD cam (such as the runcam 2) all in one removable/swappable pod. This pod can be friction mounted with the supplied mounting bracket (the mounting bracket can be permanently glued to the aircraft while the pod can be removed and swapped to a different airplane at will). VTX is mounted using a small Ziptie. drill out the hole if you want to use bigger zip ties. I have uploaded two versions, one that fits a runcam swift 2 and another with holes for a bracket mount for any other camera. i am pretty inexperienced (this being my first published project) so i am fully open to suggestions. As for settings, these are what i have used, but again, i probably dont have everything perfect so use your own judgment here... PLA 0.2mm quality wall thickness 2mm brim adhesion 20% infil 40mm/s speed any questions/suggestions, hit me up. i would appreciate any help i can get!
Statistics
Likes
2
Downloads
0