Frame for AT070TN90 HDMI TTL LCD kit
Description
A very basic frame for 7 inch LCDs like AT070TN90. Two pieces hook around the back, and provide a frame for the HDMI/VGA adapter PCB to mount to. Use M3x8 or longer screws (but not too long) straight into the rear frame pieces. Some of the screws do not go all the way in, because parts on the PCB impede the screw heads. Once the rear piece is fixed in place, the pieces just snap into the base. I've only printed the rear "original" pieces. Depending on the width and location of your FPC cable on your particular LCD, you may need to slim down a section of one of the sides.
Statistics
Likes
0
Downloads
0