Valve cap opener (for cars)
Description
I was tired of getting dirty handy by removing the valve cap on my tires. So I designed a small tool to help me with this. It fits perfectly on my valve caps, although there might be differences. My cap has the dimension 10.6mm diameter (on the thickest side) and ~12mm height. The opener has an outer diameter of 14mm (if you need to rescale yours) and 30 pins inside to fit the grooves. For the print settings: I used a .4mm nozzle and .25mm layer height. Infill doesn't matter much, I was going with 15%. Have fun with it.
Statistics
Likes
2
Downloads
0