Straight Edge Guide for Ryobi P601 Trim Router
Description
This is a straight edge guide designed to be used with the Ryobi P601 Hand-held Battery Operated (18V ONE +) Trim Router. Three versions: Regular, Small, Micro Hardware Required: M8 x 1.25 Bolts mostly unthreaded shank (preferred). Length based on version and desired offset. Qty 2. (120mm+ recommended) Threads into router. M8 x 1.25 x 35mm, Qty 2. For tightening up edge guide at desired distance. M8 x 1.25 Nut, Qty 2. M5 x 0.8 x 60mm+ screw fully threaded, (Optional) to assist in Micro adjustments) I have verified this fits the Ryobi P601, It may fit any router with a 60mm center to center distance between M8 x 1.25 attachment bolts. Feel free to comment if you use this successfully for any other brand router. Originally got the idea based on comments that a Ridgid straight edge guide would also fit. Everything I found was 20$ plus and only available on line thus this design.
Statistics
Likes
44
Downloads
0