Team Losi JRX / LXT Gear Cover
Description
This is a replacement gear cover for the Team Losi JRX-based vehicles (JRX-2, JRX-Pro, JRX-Pro SE, LXT, Junior 2, Junior T). This will work with the original LRM or retrofit transmissions. This is loosely based on a combination of aftermarket covers and the original cover. I have added some additional material around the screw area to allow for more common lengths of 4-40 screws. The plug is a flexible plug based on aftermarket covers. It should be printed in flexible filament. If you want to use a more rigid element/plug, you will need to source one and/or resize the hole. UPDATE: Part has been printed and clearances confirmed to sliders. It does get tight on full shock compression but should be just fine. UPDATE 07/01/20: Gear cover updated (V2) with more clearance for spur gear. It should clear at least an 86T gear (possibly 88T). This may pose some challenges due to wall thickness in this area but overall cover thickness has not been reduced anywhere else. If you have a hydra-drive unit, it should clear, but I have not checked. The mounting flange on the post has been increased in thickness as well (per request). When I print this part, I will remove the V1. I may add a non-slipper version at some point.
Statistics
Likes
2
Downloads
0