Dice-shaped storage box - 1 or 2 colour for single extruders
Description
This is a little dice model I made while getting to grips with Fusion 360. The dice splits into two and forms a hollow box for keeping stuff in - game tokens and actual dice in my case. There are indents in the box body for all the number spots, so it'll look OK if you just want to print the box halves and stop there (or paint them), but I included separate spot inserts if you want to print them in a different colour and glue them in. If you do want to add spot inserts, there's a whole-spot and a half-spot model (for use on the 5 and the 3 that both have a spot across the box join). You'll need : Half-spots x 4 Whole-spots x 19 The Fusion 360 model file is also there if you want to play with it - it's fully parametric and is easily controlled by a handful of User Parameters (go to Modify->Change Parameters if you're new to the program). You can set: Size Wall Thickness Clearance (for the snap-together halves, 0.2mm gave me a nice snug friction fit)
Statistics
Likes
15
Downloads
0