DJI Mavic Air 2 Mobile Phone Mount (Regular and Large)
Description
This is a remix of [Helichrissi's](https://www.thingiverse.com/thing:4406509) Mavic Air 2 phone holder design. My goal for this remix was to make the holder a little more sturdy by adding more screws. I also wanted to create one that was slightly larger to accommodate my phone with Otterbox case. I added four screws to attach the lower part of the holder to the base and also added a center screw to attach a clamp to keep the base from slipping off the controller. Finally, I designed a thumbscrew to allow for toolless assembly and disassembly of the mount. <h3>What to Print</h3> <ul> <li>1 -Base</li> <li>1 - Holder Bottom (either regular or large but not both)</li> <li>1 - Adjustable Slider (either regular or large but not both)</li> <li>1 - Clamp</li> <li>2 -Thumb Screw</li> </ul> <h3>Additional Supplies Needed</h3> <ul> <li>4 - M3 x 12MM Socket Head Cap Screws</li> <li>4 - M3 Nuts</li> <li>1 - M4 x 30MM Socket Head Cap Screws</li> <li>4 - M4 Nuts</li> </ul>
Statistics
Likes
9
Downloads
0