Helinox Chair Replacement Foot - No Supports
Description
The original design by TheBudderNinja was the best looking foot I found for the Helinox chair as it replicated the original shape and overall design. Not wanting to have to drill out the center supports after printing, I modified the original dxf and removed them. I also found the inner diameter of the foot (12.7 mm) was a bit undersized for my Helinox chair which had leg a diameter of 14mm. Scaling the part up approximately 11% made it fit snugly. This means the entire foot is slightly oversized compared to original.
Statistics
Likes
6
Downloads
0