Brabantia Touch Bin G 25l - Lid Repair/Upgrade to replaceable pin
Description
Non replaceable pin was broken. Cut out the remainder of the pin and a slot. Printed Brabantia_Bin_Size_G_Striking_Pin.stl from https://www.thingiverse.com/thing:2981497 ... But I did not want to glue it down. Ended up making a pin retainer block that is held in place by two small screws and an adapted REPLACEABLE pin. there is also an STL where the block and the pin are one piece, but this is untested. Remember: thermal forming is your friend. Pay attention to printing orientation. Make sure the layers run the length of the pin and not across it.
Statistics
Likes
0
Downloads
0