Railcore 300ZL and 300ZLT Door Panel Side Hinges - Factory Bolts
Description
This is a remix of lostapathy's excellent door design. This panel side hinge allows you to use the "factory bolts" included in the Filastruder kit instead of replacing them with longer ones which requires partial assembly of the printer. The hinge friction fits over the nyloc nuts and stays in place while acting as a drill guide. To mount, drill two holes into the HDPE panel using a 3/32 drill bit at the location of the two holes in this hinge. You can mark them with a punch or marker or simply drill the holes with the hinge friction mounted onto the nuts (I used the latter method). I used M3x16mm flat head bolts to self-tap into the 3/32 hole, but button head will work just as well. All other parts and assembly instructions can be found in lostapathy's thing page.
Statistics
Likes
2
Downloads
0