Ender 3 Pro Front Electronics Case / Enclosure
Description
13/12/2020: v3 added. The case fan in the previous version was noisy due to turbulence since the fan was too close to the case. More space created for washers to be added to make space between the fan and the wall of the case. 13/07/2020: New v2 version added. A chamfer has been added to the usb and mSD hole so that it would be easier to insert and remove the mSD. I found it really troublesome to access the controller board with the stock enclosure and decided to design my own. This design features a removable top cover that allows for access from the top. Sliding the print bed back allows for enough room to work on the controller board. The stock case cooling fan has been re-positioned to the right side. Use 2 M3 12mm and 2 M3 18mm screws to secure the fan. The LCD ribbon cable passes through an opening on the grill on the right. I have provided 2 versions of this design. One uses M3 screw inserts and the other has 3mm holes which allows M3 screws to carve out the threads when screwed in. This design has only been tested on the Ender 3 Pro but not the Ender 3. Stock Creality Control Board and SKR mini E3 fits in the case. STEP files have also been included. Have fun! Hardware Required: 1. M3 4mm Screw (Stock) x 5 pcs 2. M3 18mm Screw x 2 pcs 3. M3 15mm Screw x 2 pcs 4. M3 10mm Screw (Stock) x 5 pc 5. M3 8mm Threaded Inserts (OD ~4mm) x 4pcs (Optional) 6. M5 7mm Screw x 2 pcs
Statistics
Likes
43
Downloads
0