Nespresso Coffee Capsule Grounds Emptier/ Recycler

Nespresso Coffee Capsule Grounds Emptier/ Recycler

Description

Want to recycle the aluminium and grounds from your Nespresso machine. Yes, any traditional Nespresso compatible aluminium capsule works! You can use the long body or ultra compact body... You will need to print: - Body (3 options) - Pusher (2 options) - Pusher Top - Pusher Base And as desired the grounds receptical and drawer The Pusher is made of 3 parts and should fit together without any glue, but you can super glue the parts to ensure they don't come apart! - Insert the capsule, coloured side up. - Place the pusher down the body and on the top of the capsule. - Push down firmly on the pusher, whilst holding the body. There will be a little resistance to start off with but eventually it will suddenly give and just continue pushing until all the grounds are out. - If using the compact body (ie without space for grounds), you will need to ensure you lift the bottom else the grounds get stuck! You can use the grounds receptical and draw! - Remove pusher and turn body upside down to push out the emptied capsule. - Repeat... The process can be easier if you cut an X in the base (end where coffee comes out) of the capsule, as well as waiting for the grounds to be dry... or at least less wet! Enjoy the recycling and oh remember that coffee grounds are food in the garden as a source of fertiliser as it contains a fair bit of nitrogen!

Statistics

Likes

5

Downloads

0