C64C pi 4b+ Retropie replacement plates
Description
This is for a Raspberry pi 4b+ inside of a C64C Case based on https://www.thingiverse.com/thing:4413053 Thanks to PitMan from Börlin to provide the case. to part 1: Printed with 50% infill. Need support. to part 2: Printed with 25% infill. No support needed. to part 3: Printed with 50% infill. Need support. ##The parts that we use## 1x USB-C mount cable: https://www.amazon.de/gp/product/B075P2S4Z5 1x HDMI coupling: https://www.amazon.de/gp/product/B00B7AGIQ2/ 2x USB-A mount cable: https://www.amazon.de/gp/product/B00S6HGY72 1x micro HDMI to HDMI cable short: https://www.amazon.de/Duttek-schlank-flexibel-Ethernet-12inches-30cm/dp/B07VCC1F4L 1x PowerBlock by petrockblock with USB-C connector shutdown savly the pi : https://www.amazon.de/gp/product/B0867FJN2J Script for power on/off via switch with the PowerBlock: "wget -O - https://raw.githubusercontent.com/petrockblog/PowerBlock/master/install.sh | sudo bash" 1x Red Cap SPST The Current Mini Momentary Push Button Switch https://www.amazon.de/gp/product/B01FDJLRRW 1x Keyrah V2b board to plug the c64 keyboard on the pi4 via USB: https://www.amiga-shop.net/Amiga-Hardware/Amiga-classic-hardware/Keyrah-v2::606.html (optional) 3mm x 8mm Tip Flat Head Self Tapping Screws: https://www.amazon.de/gp/product/B01FXMJ5KA (optional) INCREWAY 1050 Metric Screws M1.4 M1.6 M2 M2.5 Screw https://www.amazon.de/gp/product/B07KN4C9XV You have also access to FCStd-Files so you can change everything in FreeCAD.
Statistics
Likes
8
Downloads
0