H96 Max 4K Ultra HD cooler stand
Description
I created this to help my Android TV box run a little better. This was designed with my H96 in mind to align with the vents located on the base of the unit. There is space to install a 40mm fan which has a separate channel for airflow. Depending on which way you mount the fan, it can be used to either force cool air in, or extract warm air from the unit. I suggest extraction as the two side vents are much wider and will draw in cooler air from either side. Without the stand, my box would report a CPU temp of 90 degrees C, During testing, I placed the stand on a laptop cooling pad with fan, immediately the temperature was reduced by 6 degrees and sat around 83 while streaming a full HD movie. The CPU load is around 60% and running at about 600MHZ which is well below full speed. I printed my piece in PLA from Amazon, support everywhere
Statistics
Likes
3
Downloads
0