Ultra thin cases for Keebio Iris rev.4 keyboard, magnetic attachable
Description
3D printed case for Keebio Iris Rev.4 PCB Assumable these using 14mm M3 bolts and nuts (bolts longer than 14mm will stick out and two pieces won't snap together) Ultra-thin profile, the middle layer is 6.8mm thick and two-piece can be snapped together and held by magnets for easy carry Added external buttons for easy firmware flashing I printed the middle layer using translucent filament to get better lighting Fusion360 file is included for anyone wants to modify themselves ------------------------------------------------------------------ You will need: 3D printed parts 14mm M3 bolts and nuts (Has to be 14mm. Or you have to use spacers if longer than 14. Shorter won't work) 12mm by 2mm magnets 10mm by 3mm rubber feet (3/8" by 1/8") super glue (optional some needle file) ------------------------------------------------------------------ Printed on Prusa i3 MK3, layer height 0.15mm Use supports Assembly video: https://www.youtube.com/watch?v=JfHvijxanyk video2:https://www.youtube.com/watch?v=asMdvHQnd10&feature=youtu.be Link to git: https://github.com/Dreammaker54/3D-printed-case-for-Keebio-Iris-Rev4 ------------------------------------------------------------------ Version 2: I added a 1mm rim to plates and mid-layer, so if your slicer cuts off edges like mine you can hide nuts inside. Also tent is supported.
Statistics
Likes
23
Downloads
0