OK2ZI antenna switch 6:1
Description
OK2ZI (karezo) sells a great 6:1 antenna switch kit on ebay, along with several other kits https://www.ebay.com/usr/karezo High quality 6:1 switch kit requires SO-239 or N connectors and an appropriate box. Suggested box is an aluminum Bud box, but I have a 3-D printer. This Thing is designed for flanged SO-239 or N connectors, with a small gap around the connectors for RTV silicone. Mount switch in lid with VHB tape. Drill holes for your preferred control connector. Run a bead of silicone around the lid flange to seal the box. Numbers supplied can be printed in contrasting color, or fill in the recessed numbers on the lid with contrasting epoxy. Edit: Added dual controller front panel and box. Flip the front panel so it will print face side down. Either print on tape or heavy hairspray. Use a syringe to fill the numbers with tinted epoxy from rear while still stuck to the print bed. Cure epoxy. Unstick from print bed. Cross sanding 120 grit through 600 grit levels the inlays and creates a nice matte finish. If you download it, please give it a like. Non-Commercial use only.
Statistics
Likes
1
Downloads
0