Compact Tripod XS
Description
IMPORTANT, THIS DESIGN IS NOT ALLOWED TO SELL! This is an XS version of the tripod I re-designed inspired by Kernel770's tripod. It was primarily designed for those with really small 3.5in³ printers and has shorter legs. In all other aspects it is identical to my larger tripod. It can handle a heavy DSLR with heavy lens and is so small it can stay on the camera. :) The camPad is printed in flexible TPU and the rest in ecoPLA. The 1/4-screw is held in place by a small piece of filament glued in place by CA-glue. Support is recommended when printing camMount. Using toothed washers with external-tooth is recommended for heavy setups but is otherwise not needed. As always, if you find it useful a tiny donation goes a long way to show appreciation. :) Hardware needed: 1 pcs M5x50 hex-head screw 1 pcs M5 nut 2 pcs M5x10 countersunk screws 2 pcs M5 Nyloc nuts 1 pcs 1/4 10mm screw (http://www.amzn.de/dp/B00OOLKD3K) 2 pcs M5 toothed washers (external-tooth) My full size compact tripod: https://www.thingiverse.com/thing:4476703
Statistics
Likes
45
Downloads
0