Raspberry pi 3B+ with 3.5" Display Mount for 2 x 4 cm Profile
Description
Since I decided to use octopi as main display - without rep rep discount display and sd-support, I was looking for a cool case for Raspberry Pi 3B+. But there was no suitable one because of the ugly protruding HDMI connector that other displays don't have BUT MINE. So I made one not only simple but also 50mm fan mountable in my need. The legs on the pictures are old version. I should have considered about the fan size. So I redesigned, reprinted, and eventually, they fit perfect. You need, - 4 x 18mm M3 Bolts (for the mount of Fan - 50x50x12) - 2 x 16mm M3 Bolts - 2 x 12mm M3 Bolts - 8 of M3 Nuts Or just 8 of 18mm M3 Bolts are okey, But if your fan height is not 12mm, The length of bolts must be adjusted not to touch back of Raspberry pi PCB. Also you need to enlarge the 4 via hole of your raspberry pi using drill to make M3 bolts fit. (Or just sqeeze in!) I hope this design is useful for you guys,
Statistics
Likes
3
Downloads
0