Skyzone V2 FPV Goggle slide in battery
Description
####Are you also done with all the wires attached to your FPV gear?#### I made several battery brackets to fit my FPV equipment and get rid of loose cables and strugling to get batteries in and out of equipment al the time. The brackets hold an IKEA Braunit battery pack and facilitate the original slide-in battery connector. The Braunit batteries have a built in BMS and are USB rechargable so no need to carry around additional charging cables or loose 18650 cells in your backpack. The batteries can be charged by a normal micro-USB cable and phone charger. #### Use this battery mount together with my other designs for the Braunit battery so you will only need one type of battery for all your FPV equipment. Qx7: https://www.thingiverse.com/thing:4165054 Radiomaster: https://www.thingiverse.com/thing:5101218 Skyzone V2:https://www.thingiverse.com/thing:4492823 Neccesary parts: Braunit battery: https://www.ikea.com/nl/en/p/braunit-battery-pack-10433258/ Connector that fits the battery: https://nl.aliexpress.com/item/4000332107587.html?spm=a2g0s.9042311.0.0.27424c4dF20Mne PCB I used to mount the connector: https://nl.aliexpress.com/item/32824842884.html?spm=a2g0o.productlist.0.0.3b5f10ediZdjXs&algo_pvid=018765da-ed36-44e3-b366-cdb8bb83d07f&algo_expid=018765da-ed36-44e3-b366-cdb8bb83d07f-0&btsid=0b0a0ac215818013617218727e51ca&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ ####!! Be carefull when wiring these up and measure to make sure the polarity matches with the polarity of your goggles connector !!####
Statistics
Likes
4
Downloads
0