Jigsaw Paint Shaker
Description
Structure for a Jigsaw bottle Shaker (I got a very cheap one ~16 U$S) What you need: ------------- - Filament, preferably PETg - A Jigsaw (I got [this one](https://www.walmart.com/ip/Hyper-Tough-3-5-Amp-Jig-Saw-JS55G1B/199349530)) - 7 M3 screws (6mm long should sufice, you may want an 8mm for the center one. - 7 M3 Nuts What to do: ---------------- - Print all parts (You'd likely want to print on PETG as it will probably last longer) - [!] Insert a nut NOW on the Part B before mounting on the blade. - Dismount the Blade from the saw (and unplug the saw to do this) - The 'Blade_covers' go around the blade, it should fit any standard 3 mm thick blade. - Tighten all 6 the screws (Don't go crazy, it's plastic) Leave the center screw for the end. - Tighten the center screw a bit until you can't remove the blade with your hands (Don't break the blade) Future Updates --------------------- - Extend the lid a bit so it holds the bottle in place. - Will Add a cap specially for dropper bottles
Statistics
Likes
23
Downloads
0