Tevo Tarantula Modular X-Carriage
Description
This x-carriage allows you to switch between mounts for the E3D V6 hotend, the Tarantula's stock hotend, and the stock-model dual hotend with ease. This will fit onto the 2040 rail, although you may need to heat the eccentric nuts before insertion. The V6 clone pictured is nearly identical to the original. All measurements are the same as the actual E3D part; the only difference is that the airline connector on mine is removable. I have also included a design for the dual, stock-model hotend (I may also design a mount for a dual E3D V6 setup at some point) ###Additional Part(s) Required: ####The V6 hotend mount will require: - 4x M3 Hex Nuts - 4x M3 16mm bolts ####The stock hotend mount will require: - 6x M3 bolts - 2x M3 hex nuts ####The dual hotend mount will require: - 5x M3 bolts - 2x M3 hex nuts I have included the design files (Fusion 360) if you wish to change anything. If you do, upload it as a remix so I can see your work! If you find any flaws with these parts, let me know (in a comment), and I will try to fix them.
Statistics
Likes
2
Downloads
0