Nozzle Type A for BT-60 based body tubes
Description
Looking for a nozzle to add to your BT-60 based body tube? Maybe this is one for you :-) Here are the recommendations for print: - For the cleanest look print in vase mode - and set bottom layer height to 67 when printing with a resolution of 0.16mm - Use 0.4mm wall thickness - Set support on plate only - Optionally print on raft - PLA is not recommended - When building a new rocket make sure the engine mount tube is even with the bottom of the nozzle Enjoy, Leo
Statistics
Likes
7
Downloads
0