Prusa LCD Hinged Cover
Description
This is still a Work In Progress. Prusa LCD Hinged Cover is used to mount the Prusa LCD display outside the Ikea Lack enclosure. Fusion 360 file attached. The STLs for now are 10x times bigger, so scale them in the slicer or use PrusaLcdCoverHinged.zip.amf (click 'No' during import - see the attached image) You need to print: LcdCoverHinged.stl - this part is a remix of original Prusa LCD cover. It is wider and has hinges at top LCDTopHinge.stl - this part is attached to the bottom of a Ikea Lack bottom tabletop. Hook.stl - this one is to hold the cover in place and it needs some improvement. For now there are two versions with thin and thick central part. It's tricky to get it right so it can easily snap while closing/opening the cover and to hold it firmly. BOM: - 4 wood screws (3 for the upper hinge, 1 for the hook), - piece of 4mm 165mm wire (this is actually the dimennsions of the hinge hole) There are two things to be improved: The hook, Change the diameter of the hinge hole so 1.75 mm filament can be used.
Statistics
Likes
12
Downloads
0