2 Color Canada Shutter Shades
Description
2 Color Shutter shades I design and made on my Prusa MK3 - White with transparent Red PLA - M2 x 8mm machine screws to attach the arms - Glue the clip/hinge pieces in the side (note left & right clips are different slightly) - Went gluing clips make sure they are straight and not angled (see the photo with the ruler I use to make sure they stay 90 degrees from the main frames) - 0.2mm layer height / 2 perimeters / 15% infill - You can also use heat the arms to form them easily if you want. I just used the Prusa online tool to set the gcode to switch the colors at the correct layer. You can also do this in the Prusa Slicer if you have a Prusa printer. https://blog.prusaprinters.org/color-print_3993/
Statistics
Likes
2
Downloads
0