Cat Drink Sink
Description
This was a fun little project I made, other than the Faucet (thing 2343198) and the knobs (thing 2456068), for a cat who loves to drink out of the kitchen sink and the bathroom tub faucets. It is pretty simple in design. All of the parts included can be printed on an Ender 3 Pro. I hope you all enjoy it as much as my cat does! He walked right up to it and started drinking away! The idea of this whole project was to make a drinking fountain that was easily broken down to be cleaned, easy to access the water source (bowl) if needed, and most importantly was functional. The whole sink is hollow underneath the sink basin so you can literally just place it over the top of the water bowl. The pump sits in the bowl with a fish tank tube that winds up through the base and then through the faucet an d ending at the opening at the end of the faucet. The beauty of it is that you don't even need to secure the tubing to the hole. The angle of the faucet verses the hole opening keep it in place unless you have very rough cats. I also added a little sink faucet attachment to the end of the faucet to give it a little bit more real feal for him. One think to not is that you will need to seal anything that will come into contact with the water or the cat's mouth with a food safe sealer. Let's keep our animals safe! Other than that. You will need to scale all of the files that I made down to 10%, sorry I wasn't modeling to scale :/ If you have any other questions, feel free to ask! IAnd I hate to say it but I ask that you please do not print these to sell.
Statistics
Likes
17
Downloads
0