Portal Security Camera For Raspberry Pi Zero
Description
I was looking for a raspberry pi zero camera housing. Found Portal Security Camera (Desk Sized) by BleedTheWay. Modified the design to fit a rapberry pi zero with camera. Not perfect just yet, but the results are pretty good. I used an rpi zero w with pijuice. The screw attached to the body is hollow, so you can feed a power cable into the housing. Also the side mounted lamp holder is hollow, as is the main body at the side mounted lamp to accomodate a real LED. The black ring around the red lense is a bit loose. Makes it easier to access the raspberry pi, but it also might fall out. A bit of tape on opposite sided on the inside of the main body solved this issue. I'm thinking about adding a few openings in the black ring and main body for tiny magnets. Added a black ring with room for 9 IR led's in case you use a NOIR (infrared sensitive) camera. 20/11/2021: Added a new camera body, camera arm and wall arm. Now all wires for power, lights, etc can be fed through the arms.
Statistics
Likes
16
Downloads
0