Vermessungspunkt Geocache (PETLING + XXL PETLING)
Description
Hello everyone, some years ago I started to use the german "Vermessungspunkte" as geocache. I know that some of them are already available with a nano container, but I was looking for a hiding place for my PETling. For this reason I have designed the following models: 1. "Vermessungspunkt Gewinde" with thread: - not necessarily dry - not as easy to print (maybe support) 2. "Vermessungspunkt" with space to glue the cap: - dry -> checked - easy to print 3. XXL"Vermessungspunkt" with space to glue the cap: - dry -> checked - easy to print - for XXL-Petling Both models can be printed in PLA or PETG. Both materials have already been tested. In the outdoor test, it was found that PLA breaks at some point... As filament color I can recommend white, red and yellow (usually white). Earth or sand in the joints made the "measuring point" look natural. When the holder is printed you only have to dig a hole and sink a water pipe into the ground, then you have the optimal hiding place ! Have fun with printing and hiding :) About pictures I would be pleased :P
Statistics
Likes
31
Downloads
0