Cable-guide for X-Axis on Prusa i3 MK3S
Description
This Cable-guide should protect the cable of the x-Axis. The cable ties used are 1mm thick and 2.5mm wide (the ones which came with the 3d Printer). The Screw is M3x6
Statistics
Likes
7
Downloads
0
This Cable-guide should protect the cable of the x-Axis. The cable ties used are 1mm thick and 2.5mm wide (the ones which came with the 3d Printer). The Screw is M3x6
Likes
7
Downloads
0