X-Carriage quick tool change for 4020 extrusion(TARANTULA)
Description
I designed an X carriage for quick tool change installed on 4020 carriage(Tarantula). Also the tool change design for e3Dv6 hot end. I reused the M5 bolts(3 pcs) and white spacers that are coming with the original carriage. see also the assembly. https://youtu.be/3ejOMi86vow I used my DIY touch-mi as bed leveling sensor. https://www.thingiverse.com/thing:3659699 My full setup you can see it here. https://youtu.be/Q00tXaCDhsk - Used M3 threaded inserts -6 pcs. 4pcs for back plate and 2pcs for e3dv6 mount. - There are 2 "fixed" wheels on the top and one adjustable at the bottom(with eccentric spacer) On the 2 wheels I used 2 metal washers to adjust the height and aligned with the third wheel compensate for higher height(eccentric).In the back of the wheel on the other side I used white plastic spacers that I had from before. - M4 x 10mm -2pcs(round head low profile, buried head) bolts for assembly the belt carriage to the base plate. - M3x10mm -4 pcs(quick tool change plate) - M3x12mm -2 pcs(e3dv6 mount)
Statistics
Likes
10
Downloads
0