Vase With Filament Lines
Description
A vase with filament lines is printed in a spiral vase mode. There are grooves in the body of the vase where the filament pieces are inserted. For printing with a 0.4 mm nozzle, 1.75mm filament, I used the following settings: - Spiral mode - Layer height 0.2 mm - Line width 0.8mm - bottom thickness 1.2mm - Speed <= 20mm / s - Full cooling above the bottom With these settings, it turned out to make a fairly waterproof vase from PLA. Source file SLDPRT attached
Statistics
Likes
302
Downloads
0