Sprue And Reservoir
Description
This is a reservoir and a sprue that will be used in the process of making a mold in silicone for making DIY dice. Youtube User Rybonator has a tutorial on making a mold in silicone using a small d6 and a sprue that is glued to the d6 and the die that will be used to make the mold I wasn't able to find a set of small d6 at the store, and then realized I could make the d6 and sprue. Someone in Rybonator's discord helpfully pointed out that resin would pool in the corners of a cube reservoir so I made the reservoir a 10mm cylinder and then added a cone to make it easier for resin to flow down There are three versions: - a sprue with no angle at the tip - a sprue with a 30-degree angle at the tip - a sprue with a 45-degree angle at the tip I've also included the blender file if you want to change the sizes of the reservoir and sprues. My intention is to use these reservoir-and-sprues in a 2-ounce disposable cup. I printed these using 0.12 layer height and 100% infill and an 0.2 mm nozzle. You may not want to use a 100% infill, but that's what I did.
Statistics
Likes
4
Downloads
0