Geeetech i3 Pro B 80mm fan for PSU
Description
Remixed to change the fan aperture to a circle (my preferred asthetic) and to widen the cable slot to accomodate a Noctua NF-R8 fan that I had lying around... Unfortunately it seems that not all Geeetech i3 pro B PSUs are the same... and this does not fit mine. I will at some stage remix it further to adjust the spacing of the pegs that engage with the PSU cover. UPDATE: I have updated with V2. This version has: 1) Change to hole placement and diameter. Holes now align to Noctua fan 71.5mm hole spacing (see https://noctua.at/en/nf-a8-pwm/specification, but this is the standard for 80mm fans). I have used 4mm hole for using M4 mounting screws, but you may need to drill out the holes a little (I did). 2) Change to location of mounting pegs to align to different Geeetech PSU. See photos. 3) Minor change to the cable slot to reshorten it in line with the original model (its still wider for the Noctua cable to fit)
Statistics
Likes
2
Downloads
0