Adjustable Shaving brush handle
Description
<h1>Adjustable Shaving brush</h1> This handle allows you to change the loft on the fly. It works by twisting the 2 pieces apart and then turning the knot as a screw. After adjustment it can be locked by twisting the 2 parts together again. It also allows you to easily change handles if you want another style of handle. <h2>requirements:</h2> * 2x M6 Metric Half/Lock Nuts (~3.2mm width) *(like rs part: 122-4403)* * 1x 25mm Hex M6 Screw *(like rs part: 190-181)* * Glue to set the knot * Knot (i use this: https://www.aliexpress.com/item/4000922340969.html) <h2>Printing:</h2> When printing the "Top part" it's important to **pause the print at layer height 7.4mm** to be able to insert a nut into the print. To do this i used cura: *Extensions>Post Processing>Modify G-Code>pause at layer height.* You should only print the parts called "Top", "Bottom" and "ScrewConnector". Print settings are not important, just don't forget the pause! <h2>Additional:</h2> In the customizer you only need to change the ones marked with (*) The rest is optional. The SCAD file uses [tjw-scad](https://github.com/teejaydub/tjw-scad) by teejaydub under license [CC0-1.0](https://github.com/teejaydub/tjw-scad/blob/master/LICENSE)
Statistics
Likes
6
Downloads
0